Signalling & Infrastructure

• 

  QR5-2 – resistor/capacitor circuit

  The relay covered by this data sheet (see downloads) consists of a resistor/capacitor unit in a BR930 series relay case. Mors Smitt Relays Modular plug in design Proven reliability Low life cycle cost
• 

  QRJ1 – DC neutral time delay relays

  Relays covered by this data sheet (see downloads) are for applications where a greater time delay is required on release than can be achieved by slugging. Mors Smitt Relays Modular plug in design Non weld contacts Silver and carbon impregnated with silver contact tips Proven reliability Low life cycle cost
• 

  QSPA1 – AC immume DC neutral slow pick-up line

  The relays covered by this data sheet (see downloads) are for use as DC repeater relays, having a delayed pick-up characteristic to bridge a gap due to loss of shunt or slow drop away of a track relay. These relays are suitable for use where alternating current at industrial frequency may be present in the circuit. Mors Smitt Relays Modular plug in design Non weld contacts Silver and carbon impregnated…
• 

  QSRA1 – DC slow release neutral line relay

  The relays covered by this data sheet (see downloads) are for use where a slow release, neutral line relay is required. TY086/GRP01 and GRP02 relays are suitable for use where alternating current at industrial frequency may be present in the circuit. Mors Smitt Relays Modular plug in design Non weld contacts Silver and carbon impregnated with silver contact tips Proven reliability Low life cycle cost
• 

  QT2 – DC neutral track relay

  The relay covered by this data sheet (see downloads) is for use in line circuits where alternating current at industrial frequency may be present in the circuit. TY152/GRP01 is for use with Aster type ‘U’ jointless track circuit equipment. Mors Smitt Relays Modular plug in design Non weld contacts Silver and carbon impregnated with silver contact tips Proven reliability Low life cycle cost
• 

  QT2R – DC neutral reed follower relay

  The relay covered by this data sheet (see downloads) is a direct replacement for GEC’s ZS2411 which is designed for use in the reed receiver amplifier circuit on RR 2002 and RR 2003 units. Mors Smitt Relays Modular plug in design Non weld contacts Silver and carbon impregnated with silver contact tips Proven reliability Low life cycle cost
• 

  QTA2 – immume DC neutral track relay

  The relays covered by this specification (see downloads) are for use on railways electrified on the 50 Hz AC system. Mors Smitt Relays Modular plug in design Non weld contacts Silver and carbon impregnated with silver contact tips Proven reliability Low life cycle cost
• 

  QTD4 – slow to release delay units

  The TY370/GRP01 is used in safety critical applications where a delay is required between the opening of a control contact and the release of a normally energised slave relay. The slave relay is powered from the TY370/GRP01 and thus does not require a separate supply. The TY372 is used in applications where an operate delay longer than that achievable by slugging is required. Mors Smitt Relays Modular plug in design…
• 

  QTD5 – slow to operate relays

  The TY372 is used in applications where an operate delay longer than that achievable by slugging is required. Mors Smitt Relays Modular plug in design Non weld contacts Silver and carbon impregnated with silver contact tips Proven reliability Low life cycle cost
• 

  QUCX5 – AC lamp proving relays

  The relays covered by this data sheet are designed as lamp proving relays where the relay is connected in series with the primary winding of the lamp transformer. TY153/GRP08 has the 50V D.C. stick coil (A7-D7) connected externally in series with a front contact. Mors Smitt Relays Modular plug in design Non weld contacts Silver and carbon impregnated with silver contact tips Proven reliability Low life cycle cost
• 

  RelayDoc

  The Mors Smitt RelayDoc is designed and customised to provide controlled auditable testing of customer specific BR930/Q-Style signalling relays in accordance with their original BRB design specifications. (more…)
• 

  Touch protection for covering free busbar connectors

  Yellow (RAL 1004), packed per 1 Set of 5 caps. Ordering code: 631910000
• 

  Voltage, current, ground & insulation fault detection relays

  Protection relays are often the last barrier to protect rolling stock and trackside equipment in the event of upstream protection system failure. They do not require auxiliary supply. Their mechanical life of 100 million operations exceed train life. Protection relays are designed on an electromechanical technology providing high reliability with friction free mobile armature and maintenance free. It has a strong ability to withstand high overloads due to its magnetic…
• 

  ZA – BRB938A, 939A, BRB966 F2 & 968 D.C. neutral track relay

  The relays covered by BRB938A are for use on railways signalling track circuits not electrified on the 50 Hz AC system. The relays covered by BRB939A and BRB966 F2 are for use on railways signalling track circuits electrified on the 50 Hz AC system. The relays covered by BRB968 are for use in circuits with Aster type ‘U’ jointless track circuit equipment where alternating current at industrial frequency may be…
• 

  ZB – BRB932A AC Immune DC biased line relay

  The relays covered by this data sheet are for use in line circuits where operation of the relay is required to be dependant on the polarity of the current in the coil. They are also suitable when alternating current at industrial frequency may be present in the circuit. Mors Smitt Relays Modular plug in design Non weld contacts Silver and carbon impregnated with silver contact tips Proven reliability Low life…
• 

  ZH – BRB960 Twin D.C. neutral line relay

  Twin relays are for general railway signalling purposes. Mors Smitt Relays Modular plug in design Non weld contacts Silver and carbon impregnated with silver contact tips Proven reliability Low life cycle cost