RI-tech s.r.o. > Products > Railway > Rolling stock

Rolling stock

  • FDG-U200 relay – Flashing, 2 solid state contacts

     Plug-in electronic railway pulsing relay with two solid state contacts in counterphase. The pulse time and interval time are equal. There is no galvanic isolation between coil circuit and contacts. The construction of the relay and choice of materials makes the FDG-U200 relay suitable to withstand low and high temperatures, shock & vibrating and dry to humid environments. No external retaining clip needed as integrated ‘snap-lock’ will hold relay into…

  • FR circuit breaker – hydraulic magnetic, railway, very high current

     Hydraulic magnetic circuit breaker for very high current railway applications to protect electronic equipment and components against unintended high currents. Optional with integrated auxiliary contacts to monitor the circuit. The trip point is always at maximum allowable current, independent of ambient temperature. Mid-trip handle to indicate clearly a breaker operation caused by electrical fault. With unique arc chute design which results in high interrupting capacities. Up to 3 poles which…

  • GR-Series Railway hydraulic magnetic circuit breaker for 35 mm rail

     Under strained or heavy use, a motor or another load-generating component within the equipment will draw additional current from the power source; when this happens, the equipment wires or components will overheat and may ultimately burn up. In addition to protecting the equipment, the entire electrical system including the control switches, wires, and power source must be protected from faults. A circuit protection device should be employed at any point…

  • High Density Relay Module (HDRM)

     Short project lead time and last minute design changes call for flexible electrical circuit solutions. Space- and weight issues call for compact, light weight solutions. Maximizing rolling stock operational up time call for large line replaceable units. The answer is the High Density Relay Module (HDRM) by Mors Smitt. Features: Extremely compact, space saving Up to 168 C/O contacts, 1 mA - 10 A @110 VDC Fast, flexible & versatile…

  • IB 200 relay – Current monitoring

     This current sensor feeds a 2 changeover relay contacts for a measured current from 16 A to 24 A. A potentiometer allows the setting of the relay pick up from 15 A to 25 A. The maximal admissible current of the shunt is 50 A, other versions are available. An 110 VDC auxiliary power supply is needed for the measure and the relay command. The electronic device is put in…

  • Intelligent Circuit Protection

     The Mors Smitt ‘Intelligent circuit protection system’ controls and monitors all AC and DC circuit breakers remotely and is capable of providing a complete status of all MCB’s via a display or through the Train Management System. (more…)

  • KCD-U200 relay – Latching , 2 pole

     Plug-in bistable railway relay with two change-over contacts. The contacts remain in the last powered position, the position is clearly visible, optional shown via a position indicator. Bistable by means of two coils and a mechanical rocker mechanism. The two separate coils are galvanically isolated. The contacts are weld-no-transfer contacts: they are mechanically forced in the same position. The construction of the relay and choice of materials makes the KCD-U200…

  • KCS-U200 relay – Latching , 2 pole

     Bistable railway relay with two change-over contacts. The contacts remain in the last powered position. Bistable by means of two coils and a mechanical rocker mechanism. The two separate coils are galvanically isolated. The contacts are weld-no-transfer contacts: they are mechanically forced in the same position. The KCS-U200 relay is a compact design relay connected with 2.8 x 0.8 mm fastons. The construction of the relay and choice of materials…

  • KDN-U200 relay – Latching, 8 pole

     Plug-in bistable railway relay with eight change-over contacts. The contacts remain in the last powered position, the position is clearly shown via a position indicator. Bistable by means of two coils and a mechanical rocker mechanism. The two separate coils are galvanically isolated. Standard equipped with magnetic arc blow-out for high breaking capacity and long contact life. No external retaining clip needed as integrated ‘snap-lock’ will hold relay into socket…

  • MSA100 – Hall effect transducer

     The Mors Smitt transducers are used to measure high currents in rolling stock and track side applications. High currents are converted lineair to low power signals. (more…)

  • MSA1000 – Hall effect transducer

     The Mors Smitt transducers are used to measure high currents in rolling stock and trackside applications. High currents are converted linearly to low power signals. (more…)

  • MSA200 – Hall effect transducer

     The Mors Smitt transducers are used to measure high currents in rolling stock and trackside applications. High currents are converted linearly to low power signals. (more…)

  • MSA2000 – Hall effect transducer

     The Mors Smitt transducers are used to measure high currents in rolling stock and trackside applications. High currents are converted linearly to low power signals. (more…)

  • MSA2010 – Hall effect transducer

     The Mors Smitt transducers are used to measure high currents and high voltages in rolling stock and track side applications. High voltages or currents are converted linearly to low power signals. (more…)

  • MSA300 – Hall effect transducer

     The Mors Smitt transducers are used to measure high currents in rolling stock and trackside applications. High currents are converted linearly to low power signals. (more…)

  • MSA500 – Hall effect transducer

     The Mors Smitt transducers are used to measure high currents in rolling stock and trackside applications. High currents are converted linearly to low power signals. (more…)