RI-tech s.r.o. > Products > Railway > Rolling stock

Rolling stock

  • UB A400 relay – Voltage monitoring

     The voltage monitoring relay UB A400 opens auxiliary loads circuits when battery voltage becomes too low and puts them back in service when battery voltage recovers. A time delay of 20 seconds engages before opening a load circuit and a time delay of 2 seconds before putting back in service a load. The plug-in design offers secure locking feature for maximum ease of maintenance (no wires need to be disconnected…

  • UB C200 relay – Voltage monitoring

     The voltage monitoring relay UB C200 opens auxiliary loads circuits when battery voltage becomes too low and puts them back in service when battery voltage recovers. A time delay of several seconds (to be defined) engages before opening a load circuit and a time delay of several seconds (to be defined) before putting back in service a load. The plug-in design offers secure locking feature for maximum ease of maintenance…

  • Universal PCB relay module

     Printed Circuit Board relay module with 10 plug-in railway relays for a total of 40 change-over contacts. Full flexibility to assign train functions to relay contacts and coils, last minute changes possible. Marshalling (cross wiring) of train wiring directly via PCB module terminals. Relay types can differ according customer requirements. Very compact solution which can be easily mounted, all mounting directions possible. The construction and choice of materials make the…

  • UTC relay – Voltage monitoring & off delay

     The time delay relay UTC incorporates also a voltage control function. The time delay is initiated by an impulse on the relay command which also closes the contact. The time delay relay can be initiated if the input voltage d0 is higher than the voltage control threshold. If the input voltage d0 is lower than the voltage control threshold, then the time delay is reset to 0, the contact is…

  • V16 socket Screw terminal, wall rail mount

     The V16 is a surface / wall and 35 mm rail mount relay socket. The V16 socket is suitable for two stripped wires up to 3.3 mm2, so looping/daisy chaining can be done on the socket and no external connector or terminal is needed. Equipped with an integrated retaining clip. To prevent fault relay placement the socket can be equipped with mechanical keying to accept only designated identical keyed relays.…

  • V17 socket – Spring terminal, wall / rail mount

     The V17 is a surface / wall and 35 mm rail mount relay socket. The V17 socket has two spring terminals per relay contact suitable for two stripped wires up to 2.5 mm2, so looping/daisy chaining can be done on the socket and no external connector or terminal is needed. Quick connection by pressing the spring terminal with a flat-bladed screw driver and inserting the stripped wire. Equipped with an…

  • V17-D relay socket

     35mm (DIN) rail mounting, relay socket. For heavy duty, industrial applications, space saving design. Installation and replacement of plug-in relays are made easy and cost saving. No maintenance is required for the user. The V17-D relay socket has spring terminals. (more…)

  • V18 socket – PCB mount

     The V18 is a relay socket for soldering on PCB. The relay will be plugged into the socket, the socket will be soldered on the PCB. There is only one way of connecting the relay to the socket to guarantee correct placement of the relay. Equipped with an integrated retaining clip. To prevent fault relay placement the socket can be equipped with mechanical keying to accept only designated identical keyed…

  • V22BR socket – Screw terminal, wall mount

     The V22BR is a surface / wall mount relay socket with extra space for ring tabs. The V22BR socket has one screw terminal per relay contact suitable for two wires up to 2.5 mm2 and 9 mm ring tabs, so looping/daisy chaining can be done on the socket and no external connector or terminal is needed. To prevent fault relay placement the socket can be equipped with mechanical keying to…

  • V23 socket – Screw terminal, wall/rail mount

     The V23 is a surface / wall and 35 mm rail mount relay socket. The V23 socket has one screw terminal per relay contact suitable for two wires up to 2.5 mm2, so looping/daisy chaining can be done on the socket and no external connector or terminal is needed. The V23 relay socket has no internal soldering connections which makes it highly reliable. To prevent fault relay placement the socket…

  • V23BR socket – Screw terminal, rail mount

     The V23BR is a 35 mm rail mount relay socket with extra space for ring tabs. The V23BR socket has one screw terminal per relay contact suitable for two wires up to 2.5 mm2 and 9 mm ring tabs, so looping/daisy chaining can be done on the socket and no external connector or terminal is needed. To prevent fault relay placement the socket can be equipped with mechanical keying to…

  • V26 socket – Crimp terminal, panel mount

     The V26 is a panel mount relay socket with one terminal per relay contact. The wires are crimped on separate crimp contacts A260 for insertion after crimping. To prevent fault relay placement the socket can be equipped with mechanical keying to accept only designated identical keyed relays. (more…)

  • V29 socket – Spring clamp terminal, wall/rail mount

     The V29 is a surface / wall and 35 mm rail mount relay socket. The V29 socket has two highly reliable spring clamp terminals per relay contact, so looping/daisy chaining can be done on the socket and no external connector or terminal is needed. The spring clamp terminal makes a quick connection possible by pressing the spring with a flat-bladed screwdriver and inserting the stripped wire. Solid and (fine) stranded…

  • V3 socket – Soldering terminals, panel mount

     The V3 is a panel / flush mount relay socket for soldering wires onto solder tags. The V3 socket has one terminal per relay contact. The V3 relay socket has no internal connections which makes it highly reliable. To prevent fault relay placement the socket can be equipped with mechanical keying to accept only designated identical keyed relays. (more…)

  • V31 socket – Faston terminal, panel mount

     The V31 is a panel mount relay socket. The V31 socket has two faston connections per relay contact, so looping/daisy chaining can be done on the socket and no external connector or terminal is needed. To prevent fault relay placement the socket can be equipped with mechanical keying to accept only designated identical keyed relays. Clear UP arrow for correct mounting. (more…)

  • V32 socket – PCB mount

     The V32 is a relay socket for soldering on PCB. The relay will be plugged into the socket, the socket will be soldered on the PCB. There is only one way of connecting the relay to the socket to guarantee correct placement of the relay. (more…)