Railway

• 

  End caps, for 1 m busbar 631912456

  Ordering code: 631912460
• 

  End caps, for 1 m busbars

  End caps, for 1m busbars: 631912256 631912357 631312252 631312351 Mors Smitt offers a complete product line of accessories for railway circuit breakers to reduce installation time dramatically. Bus bars, feeding blocks and handle locks for the Mors Smitt hydraulic magnetic circuit breakers. Ordering code: 631912360
• 

  Energy meter

  Mors Smitt™ energy meter is a compact solution to measure energy consumption across multiple sub-systems of the rail transport that ensures: Complete, accurate overview of energy consumption Provides data for energy management, savings, and maintenance Easy installation Features: Ultra-compact energy meter with 4 input channels Single-phase or multiphase, AC/DC Auxiliary power supply integrated for sensors Compliant with all relevant rail directives Ethernet / RS485 communication / option MVB VIDEO
• 

  ER-Series Railway hydraulic magnetic circuit breaker

  Under normal operating conditions, accidents may not appear to be a problem. However, normal operating conditions are not always guaranteed. Under strained or heavy use, a motor and/or another load-generating component within the equipment will draw additional current from the power source; when this happens, the equipment’s wires and/or components will overheat and may ultimately burn up. In addition to protecting the equipment, the entire electrical system including the control…
• 

  External pin terminal, insulated, long pin

  Ordering code: 631910003
• 

  External pin terminal, insulated, screw connected, 3 front connectors

  Ordering code: 631910005
• 

  External pin terminal, insulated, short pin

  Ordering code: 631910002
• 

  External pin terminal, insulated, side connected

  Ordering code: 631910004
• 

  FDA-U200 relay – Flashing, 2 pole

  Plug-in electronic railway pulsing relay with two change-over contacts. When the relay is activated the coil starts with an interval. The pulse time and interval time are equal. The pulsing frequency is adjustable with a lockable knob. The relay can also be supplier with a fixed pulsing frequency (no knob). The relay is standard equipped with double zener diode coil protection. The construction of the relay and choice of materials…
• 

  FDA-U300 relay – Flashing, AC input, 2 pole

  Plug-in electronic railway pulsing relay with two change-over contacts, suitable for AC coil voltages with a frequency of 50/60 Hz. When the relay is activated the coil starts with an interval. The pulse time and interval time are equal. The pulsing frequency is adjustable with a lockable knob. The relay can also be supplier with a fixed pulsing frequency (no knob). The relay is standard equipped with double zener diode…
• 

  FDA4-U200 relay – Flashing, 4 pole

  Plug-in electronic railway pulsing relay with four change-over contacts. When the relay is activated the coil starts with an interval. The pulse time and interval time are equal. The relay is supplied with a fixed pulsing frequency. The relay can also be supplied with an adjustable pulsing frequency (relay with knob). The relay is equipped with two LEDs which indicate the presence of power supply and the energizing of the…
• 

  FDA4-U200N relay – Flashing, 4 pole

  Plug-in electronic railway flashing relay with four changeover contacts for reliable switching of very low currents (1 mA @ 5 VDC) up to currents of 10A @ 110VDC. When the relay is activated the coil starts with an interval. The pulse time and interval time are equal. The relay is supplied with a fixed pulsing frequency. The relay can also be supplied with an adjustable pulsing frequency (relay with knob).…
• 

  FDC-U200 relay – Flashing, 2 pole

  Plug-in electronic railway pulsing relay with two change-over contacts. When the relay is activated the coil is energized with a pulse. The pulse time and interval time are fixed (standard on 1 second and 30 seconds). The construction of the relay and choice of materials makes the FDC-U200 relay suitable to withstand low and high temperatures, shock & vibrating and dry to humid environments. No external retaining clip needed as…
• 

  FDC4-U200 relay – Flashing, 4 pole

  Plug-in electronic railway flashing timer relay with four change-over contacts. When the relay is activated the coil is energized with a pulse. The pulse time is adjustable with a lockable knob. The relay can also be supplied with a fixed pulse time (no knob). The relay is equipped with two LEDs which indicate the presence of power supply and the energizing of the coil. Also standard equipped with magnetic arc…
• 

  FDC4-U200N relay – Flashing, 4 pole

  Plug-in electronic railway flashing relay with four changeover contacts for reliable switching of very low currents (1 mA @ 5 VDC) up to currents of 10A @ 110VDC. When the relay is activated the coil is energized with a pulse, which is repeated after the fixed cycle time until the relay is de-activated. The pulse time is adjustable with a lockable knob. The relay can also be supplied with a…
• 

  FDG-U200 relay – Flashing, 2 solid state contacts

  Plug-in electronic railway pulsing relay with two solid state contacts in counterphase. The pulse time and interval time are equal. There is no galvanic isolation between coil circuit and contacts. The construction of the relay and choice of materials makes the FDG-U200 relay suitable to withstand low and high temperatures, shock & vibrating and dry to humid environments. No external retaining clip needed as integrated ‘snap-lock’ will hold relay into…